Tiny® with Urine container

A small toilet for smaller spaces Tiny is the latest of Separett’s urine diverting products. After several years of development of urine diverting toilets this has led to the simple and flexible design of Tiny that is a perfect fit for small spaces. The toilet can be operated with 110-230V or with 12V solar cell / battery power. The fan has very low energy consumption and is therefore suitable for battery or solar cell operation as well. The battery and battery cables are not included.

Closed system This model of Tiny contain both the liquid and solid waste inside of the toilet with two containers, one for urine and one for the solid waste. If the toilet is being used in a permanent home of 2 people, the solid waste container needs to be emptied once per week. The urine container needs to be emptied 2-3 times per week. The urine container has a sensor that gives a signal to the Separett-logotype that lights up in a red color when it is time to empty the container.

Hygenic and odorless The operational reliability of Tiny is high and the installation of the toilet is easy. The fan exhales the small odor that is formed, despite urine separation, and also contributes to a better indoor climate by constantly keeping the air in the space in motion. The fan is effective and silent and most effective during continuous usage.

View screen The view screen hides the solid waste in the container and is pushed to the side when you sit down to use the toilet. This results in that you only see the toilet waste when it is time to empty the solid waste.

1. Always sit down when using the toilet Sit a little further back than usual so that urine and solid waste are separated.

2. The view screens will slide away when you sit down.

3. Toilet paper can be thrown in the same bin as the solid waste.

The urine-separating toilet Tiny separates urine and solid waste and is equipped with a fan that draws out moisture and air, which makes it completely odorless in the space where the toilet is located. This model of tiny has an internal collection of both solid waste and urine where the solid waste ends up in a compostable biobag made of corn starch which can then be composted and the urine collected in the internal urine tank. If the toilet is used in permanent housing by 2 people, the container for the solid waste needs to be emptied once / week and the urine tank 2-3 times / week. The urine tank is equipped with a sensor where the Separett logo on the toilet lights up red when it is time to empty.

Toilet placement

Separett Tiny has no requirements for room temperature and works in both cold and warm spaces. The onlyrequirements are that you must be able to lead the urine away and fit a ventilation pipe.
The toilet is made to be placed on the floor against the wall, and for extra stability it should be attached either to the floor, wall or both.

Make holes according to installation template

The enclosed installation template shows possible installation options for urine drains and ventilation pipes through the wall behind the toilet or through the floor. These options enable an installation without visible pipes.

Install ventilation pipe

The toilet is designed for 50 mm pipes (outer diameter). For optimal function it is recommended that you use Separett’s own installation kit that has pipes and angles in the correct dimensions. Separett Tiny can be installed with up to 5 meters of ventilation piping and 2 90-degree bends. Ventilated air can go through a wall, floor or roof, for example, up into an attic and out through a suitable side of the house. If there is already a ventilation pipe present from a previous toilet installation, the toilet may be connected to
that duct, provided that it is not smaller than 50 mm and that it meets the piping requirements. Should you need longer piping that exceeds the recommendations above, you may install an extra fan (article number 13008) The toilet comes with a coupling for connecting the included 40 cm-long 50 mm pipe to a 1.5 inch pipe (schedule 40).

Install urine hose

The toilet is delivered with a 2-meter (6,6 ft) urine hose. To connect this to the toilet, use the included straight joint or the 90-degree joint. Like the installation of the ventilation pipes, it is possible to connect the urine tube so that no pipe is visible where the toilet is installed. This is achieved by angling the 90-degree connection downwards or using the straight connection, as shown in the pictures below.

Separett Tiny should be cleaned with an environmentally friendly non-abrasive cleaner. This toilet is made of a strong, high-gloss polypropylene material that risks being scratched if an
abrasive cleaner or scrubbing plate is used.

The fan must run continuously to avoid odors in the bathroom. Regularly rinse the filter in the fan duct with water to maintain good ventilation.

• Instructions for use
• Installation manual
• Universal adapter for 110-240 V use
• 1 x latrine container with lid
• 1 x urine tank
• Ø 50 mm ventilation pipe 40 cm
• Adapter Ø 50 mm - 1 ½ ”
• Ventilation grille with insect net
• Ventilation cowl
• Holder for drain cleaning tablet
• Installation sketch
• Screws for wall / floor
• Sample compostable bags
• Drain cleaning sample
• Absorb pad sample
• Filter for ventilation pipes

Note: Battery and batterycables are not included